Alternating Current (AC) vs Direct Current (DC) Power: An HVACR Guide
Posted on February 8, 2019
Are you interested in becoming an HVACR professional? Have a keen interest in AC vs DC power? While attending an HVACR program at a vocational school, you will have the opportunity to study alternating current (AC) and direct current (DC). This knowledge will come in handy when working on heating, ventilation, air conditioning and refrigerators. As an HVACR technician, you can help both residential or commercial clients with indoor heating and air conditioning. And you can also work with transportation companies and warehouses that use refrigeration to manage the global supply of food. Both need an acute knowledge of AC and DC power.
- A General Interest in Energy Generation
- Attention to Detail
- Problem Solving Skills
- Critical Thinking
- Great Dexterity
- Trade School Attendance for Training
- A Willingness to Work in an Evolving Industry
The State of Electricity
In the 1880s, the electrical industry was in a state of disarray. In the early years of electricity, direct current could not be easily converted to high voltages and powerplants needed to be established within one mile of the end user. Alternating current, on the other hand, could be provided relatively inexpensively at several thousand volts with little loss of power as it traveled to the end user. As opposed to DC, an AC power plant could be located several miles away from the end user. With Thomas Edison holding patents on DC power at the time, a current war was sparked.
The War of the Currents: AC vs DC Power
The War of the Currents began in the 1880s with Thomas Edison and Nikola Tesla. As reported by the Department of Energy. Tesla believed that alternating current was necessary to phase out kerosene, which up until the introduction of electricity, had been used to light lamps and heat cookstoves. As Telsa championed AC, Edison fought back with his patents on DC.
The final battles of the War of the Currents took place at the Chicago World’s Fair in 1893 and the powering of Niagra Falls in 1896. General Electric lost both bids to Westinghouse, who purchased AC patents from Tesla. For over a century, AC has dominated the electricity industry but in recent years, DC has become vital for the use of electronics such as TVs, LEDs and computers. When communities needed to get power to less populated areas, DC power proved inefficient, so AC power became the dominant power choice. DC power came back into favor with the use of batteries, fuel cells and solar cells. Inverters can change DC to AC as needed. While DC can be stored in batteries, AC power can’t.
With the invention of semiconductor electronics, conversions between AC and DC have become economically possible. Advances in electricity has made direct current more stable, and with its minimized power loss, more and more companies today are using it to transport electricity over long distances.
Alternating Current (AC)
In the US, alternating current reverses direction 60 times per second. This enables it to be easily converted into different voltages using a transformer. AC can be produced with the use of an alternator in which a loop of wire is spun inside of a magnetic field. The magnetic field induces a current on the wire with the rotation of the wire coming from either a turbine or flowing water. The wire spins and enters a different magnetic polarity periodically causing the current to reverse direction 60 times per second. In a set of water pipes, AC can by generated by connecting a mechanical crank to a piston that shifts water back and forth. AC power is safe to transfer over longer distances and can provide more power to rural areas. The frequency of alternating current is 50Hz. The power factor of AC lies between 0 and 1.
Direct Current (DC)
Direct current was aptly named because the electric charge only flows in one direction. Today, most of our electricity is powered by alternating current, but gadgets such as computers and electric vehicles rely on DC power. To generate DC, a device called a rectifier is used to convert AC to DC. Batteries also provide DC power, generated from a chemical reaction which occurs internally. DC power cannot travel very far as it begins to lose energy. The frequency of direct current is zero. The power factor is always 1.
It is important to note that electricity only flows in two ways, either AC power or DC power. AC and DC power are different types of voltage or current used for the conduction and transmission of electrical energy, according to the MIT School of Engineering. DC current flows in a flat line, whereas AC current moves in a wave like form.
As both AC and DC are necessary to power everyday appliances such as refrigerators and air conditioners, it is vital for HVACR professionals to understand how they function and provide power. Learn more about AC vs DC power while attending an HVACR Technician program at your local trade school.
Did the difference between AC vs DC power interest you? Do you want to develop the skills to be a successful HVACR Technician? Does a career as an HVACR Technician interest you? MIAT’s HVACR Technician Program is 9 months in length for full-time students, assuming there are no interruptions in training, and is offered at both the Michigan and Texas campuses. MIAT provides training that allows students to focus on their chosen field, earning their certification faster than a traditional 2 or 4-year college degree or 3 to 5-year apprenticeship.
To learn more about HVACR Technician career training and to explore if MIAT is right for you, fill out the form on this page.
MIAT College of Technology is accredited by the Accrediting Commission of Career Schools and Colleges (ACCSC).